High Temperature Globe Valves

1.Specification

Size:	2"-24"
Pressure:	150LB-2500LB
Body Material:	WCB, WC6, WC9, CF8, CF8M, CF3, CF3M, CN7M, LC1, LC2, LC3, LCB, LCC, Monel, 20# Alloys, 4A, 5A, C95800, C95500, A105, F304, F304L, F316, F316L, LF1, LF2, LF3, LF9, F51, F53, F11, F22, etc.
Seal Material:	STELLITE, 13Cr, SS304, SS316, etc.
Connection Type:	Flanged, Butt Welded, Socket Welded, NPT
Operation:	Handwheel, gear operated, pneumatic, motorized
Face to Face Dimension:	ASME B16.10
Flange End Dimension:	ASME B16.5
Butt Welded Dimension:	ASME B16.25
Design and Manufacture:	BS1873,API623
Test Standard:	API 598,API 6FA, ISO 15848-1-2

2.Features

Designed for operating temperature up to 595℃

Available with ball type, needle type, parabolic type disc, etc.

Low friction between sealing surface when opening and closing; high sealing performance and abrasion resistance

Applicable media: water, oil, steam, ammonia, acid, alkali, etc.

Applied to petrochemical, electric power, metallurgy, natural gas, pharmacy, and other industries

3.FAQ

Can you control steam pressure with globe valves

Yes, globe valves can be used to control steam pressure. Globe valves are commonly used in steam systems for their ability to regulate the flow of steam, api602 forged gate valve. By adjusting the position of the valve disc, the flow rate of steam can be controlled, which in turn affects the pressure. Opening the valve allows more steam to pass through, increasing the pressure, while closing the valve restricts the flow, reducing the pressure. It is important to note that globe valves are not the only type of valve used for steam pressure control, but they are a common choice due to their precise control capabilities. api 6d ball valve

How to fix a globe valve

1. Shut off the water supply to the valve, low temperature ball valves.
2. Remove the valve handle and bonnet to access the valve stem.
3. Inspect the valve stem and packing for any damage or wear.
4. Replace any damaged or worn parts as necessary.
5. Reassemble the valve and turn the water supply back on.
6. Test the valve for proper operation. forged ball valve

Note: The specific steps for fixing a globe valve may vary depending on the type and model of the valve. It is recommended to consult the manufacturer's instructions or seek the assistance of a professional plumber if you are unsure about how to proceed.

How to use globe valve

To use a globe valve, follow these steps:

1. Ensure that the valve is in the fully open position before installation.
2. Connect the valve to the pipeline using appropriate fittings and connections.
3. Make sure that the valve is properly aligned with the flow direction indicated by the arrow on the valve body. carbon steel gate valves
4. Slowly turn the valve handle clockwise to close the valve. This will restrict the flow of fluid.
5. To open the valve, turn the handle counterclockwise. This will allow the fluid to flow through the valve.
6. Adjust the valve to the desired flow rate by partially opening or closing the valve.
7. Regularly inspect the valve for any leaks or signs of damage. high temperature gate valves
8. If necessary, perform maintenance or repairs according to the manufacturer's instructions.