Killed carbon steel, also known as deoxidized steel, is a type of steel that has been treated with a deoxidizing agent, such as silicon or aluminum, to remove oxygen and other impurities from the molten steel.
Valve limit switches are devices used in conjunction with valves to detect the position of the valve and provide feedback to a control system.
The pressure relief valve on a water heater is a valve used to release the pressure within the water heater. During the use of the water heater, due to the influence of heating and insulation, the water and air inside it will generate a certain pressure. If this pressure is too high, it may threa...
The steps to repair a leaking pressure relief valve are to first close the relevant valve, then release the pressure, prepare tools and materials, perform visual inspection, leak inspection, check seals, replace parts, reassemble, and finally reopen the relevant valve and inspect the pressure rel...
The valve cover gasket is like a sealing ring installed between the valve cover and the cylinder head to prevent engine oil from leaking. So why does a broken valve cover gasket cause the engine check light to come on? This is because when the engine is working, the computer is constantly monitor...
Whether the swing check valve can be installed vertically is actually related to the type and design of the valve. Let’s talk about this topic in detail. Swing check valve is a common valve type, mainly used to prevent the backflow of media. It opens or closes by rotating the valve disc in the va...
The gas stop valve is an important gas pipeline accessory. Its main function is to control the flow of gas in the gas pipeline. It can adjust the gas flow, cut off the gas flow, etc. The installation position of the gas shut-off valve is very important for the safety and normal use of gas pipelin...
Regarding the installation height, there is actually no fixed standard answer, because different site environments and construction conditions will affect the installation height. In order to facilitate operation and maintenance, the height of the check valve is usually set at about 1 meter above...
First, make sure the water heater is turned off so that no water will spray out and burn you. Then, find that pressure relief valve, it looks a little like a little valve. Find a suitable tool, such as a wrench or screwdriver, to use to unscrew the set screws. Loosen these screws carefully withou...
To replace the water heater pressure relief valve, first close the water heater inlet valve, then prepare tools and materials, disassemble the old pressure relief valve, check the mounting hole of the pressure relief valve, install a new pressure relief valve, check for water leakage and finally ...
The first reason why the pressure valve of the water heater is leaking is that the pressure valve may be faulty. The second reason is that the connection of the water heater pipe is loose. The third reason is that the inner tank of the water heater is ruptured. The fourth reason is the water pres...
The functions of gaskets include sealing, supporting and fixing, reducing vibration and noise, preventing other substances from entering, and auxiliary sealing. Some valve gaskets not only have sealing functions but also assist sealing.
English
Español